What are the maintenance processes of the high voltage motor
1. Around the line, according to the voltage level of the motor, the line is selected.
2. The purpose of wrapping it before forming is to protect the outer insulation of the coil, the insulation between the layers and the insulation of the interturn.
3, forming, using the molding machine to complete this process
4, plastic, in order to prevent the inlay of the line, causing difficulties in embedding.
5. Packing mica belt and hot pressing, the purpose of hot pressing is:
(1) it is convenient to inlay line after setting.
(2) it can be moisture-proof and waterproofing.
(3) to prevent corona discharge from the slot.
(4) to complete the closure of the outside world and avoid high pressure breakdown.
6. Test the pressure resistance,
7, inlay line, all wire inlay wiring is finished, the whole machine can be finished once again.
8, impregnating paint, the purpose is to solidify wire rod insulation and wire insulation inside and outside the trough, to prevent vibration to destroy the insulation structure.
9, test, using the whole machine parameter test